Sonax Xtreme Shampoo 2 in 1 | 1000 ML

High-yield concentrate for cleaning painted surfaces, metal, glass, plastic, rubber and foil-decorated surfaces with a special drying aid. This ensures streak-free, residue-free drying of the treated surfaces. Washing with no rubbing down afterwards – fast and easy, in two steps:
Step 1: Thorough wash by hand using the benefits of active ingredients
Step 2: Self-drying of the surfaces thanks to surfactants – no rubbing down!

Before you start, you need to have following as well

1. Wash Mitt. E.g. Sonax Multi Sponge
2. Drying Towel E.g. Autozeel Microfiber Drying Towel

Directions to use:

1. Use 2 bucket method for cleaning the car
2. In one empty bucket put in a cap full of Sonax Xtreme Shampoo 2 in 1 and start the tap is full force. 1 cap of Sonax Xtreme Shampoo 2 in 1 into 5-7 litres of water.
3. That will create good amount of foam and suds
4. Work under cool shade. Avoid Direct Sun light 
5. Dip your Wash Mitt into shampoo and start by cleaning the car from top to bottom
6. Finish one panel and dunk your wash mitt into Bucket 2 of clean water. Rinse the wash mitt.
7. Dunk in Bucket 1 filled with shampoo and clean the car panel
8. Repeat Step 5, 6 and 7 till you finish the car
9. Rinse with water
10. Dry the car with Microfiber Drying Towel e.g. Autozeel Microfiber Drying Towel 400 GSM.
11. Admire your clean car

The Sonax Xtreme Shampoo 2 in 1 has a nice fragrance which you will enjoy while working on your car. Post drying, the car surface would become slick and shiny.

Notes:

• Always start from top to bottom, that is finish roof first, then glass, boot, bonnet and progress to lower panels like door and bumpers.
• If you are working under sunlight, wash one panel at a time, rinse it with water and dry it. To avoid water spots.
• Dermatologically tested
• Phosphate Free and pH Neutral